Causes of surface burn of workpiece after machining by CNC cylindrical grinder 1. Improper feed control. The countermeasures for this reason are: reduce the feed amount, use a larger feed amount at the beginning of the production of the CNC cylindrical grinder, and use a relatively small amount in t... read more
There are many reasons for the vibration of the grinder machine. Here are the three main ones: Check the ground level first. If the level of the anchor screw of the machine tool is not adjusted properly, it will cause the resonance of the machine tool. Because sometimes the ground level of the proce... read more
Step 1: Remove the spindle, polish the spindle journal, improve the surface roughness of the spindle, and make the spindle roughness of the CNC cylindrical grinder reach Ra0.05um. Then carry out fine grinding to make the roughness reach Ra0.05um or more. Step 2: The lubricating oil of the static pre... read more
During surface grinding, the workpiece can be installed on a rectangular worktable for reciprocating linear motion, or on a circular worktable for circular motion. When the peripheral grinding method of the grinding wheel is used, the main shaft of the grinding machine is arranged in a horizontal la... read more
The common feature of CNC grinding machines is that the cutting force is relatively small, so it is necessary to improve the grinding force of the tool and make regular inspections of the CNC grinding machine. At the same time, it is very important to understand the maintenance process of CNC cylind... read more