CNC cylindrical grinder, it is a more commonly used gri […]
CNC cylindrical grinder, it is a more commonly used grinder product, the application field is also wider. In order to be able to use this grinder and increase the efficiency of the grinder, we can perform regular maintenance on the grinder. We should pay attention to some maintenance matters during use, so as to increase the working efficiency of the equipment and achieve the purpose of lengthening the utilization rate.
Firstly, the precautions for the main points of installation. During the installation process, the operator should transport the grinding machine to the installation site in time for installation, so as not to affect the accuracy of the equipment. When lifting the grinder, pay attention to the position of the equipment. In order to avoid tipping, the instability of the grinder can easily cause the grinder to tip, which is also an unsafe measure for the operator. After the goods are received, they should be inspected and accepted. If problems are found, they should be contacted with the manufacturer in time for handling. After the grinder is installed, it may sometimes be adjusted in the horizontal direction. If the equipment is found to be not stable enough, it is mainly adjusted by screws. The installation of the CNC grinding wheel. For new grinding wheels, carefully check before installing. Check carefully whether the grinding wheel has cracks, etc. If the grinding wheel has obvious cracks, it means that the product is unusable, and it should be replaced in time.
Next is the knowledge about the maintenance of CNC grinding machines. The maintenance of grinding machines can be divided into early and late stages. The pre-maintenance focuses on local maintenance and repair, and the operator must carry out regular inspection and care. Early cleaning of cooling pumps, water tanks, oil filters, disks, and other equipment. Check whether the screws are tight, clean all parts of the grinder, and add lubricant as required. Later, check whether the joints of the pipelines are correct, and perform overall lubrication and fault detection on the entire equipment.
Maintenance personnel should carry out equipment testing in time, be able to find problems in time, solve problems, and reduce the chance of damage to the grinding machine. After each operation, all parts and sliding parts must be cleaned first and then lubricated. If the equipment is directly lubricated without cleaning, it will cause the lubricant to deteriorate in advance.