The CNC five-axis centerless grinder feeder is a high-hydrostatic CNC five-axis centerless grinder, combined with a special feeder and receiver to realize the automatic grinding of the workpiece. Through matching and connecting with the system, combining the domestic and foreign grinding machine control technology and field experience to design the system program, it has the function of grinding wheel consumption and automatic compensation after dressing. Set experience parameters to adjust the table feed to adjust the outer diameter of the workpiece, and control the workpiece The accuracy of geometric dimensions. At the same time, it has the functions of counting statistics, alarm before grinding wheel, first stop (detection) after grinding wheel and continuous function.

This centerless grinder feeder is equipped with a wealth of alarm protection functions, which guide users to perform simple fault handling, simplify complex procedures, professional control interfaces, and simple processing parameters. Non-professionals can also be competent for processing and production after a little training. Reduce the investment of professional human resources and reduce the cost of human resources. The feeding and receiving method adopts a stepping feeding and receiving machine, and the workpiece is sent to the grinding position by a manipulator. The feeder is equipped with a manual adjustment screw. After the grinding wheel is worn, the screw can be manually adjusted to adjust the position of the workpiece to adapt to the gripping of the manipulator.

After the workpiece in the grinding area is clamped to the grinding position by the manipulator, the electric cylinder of the centerless grinder feeder moves to top the workpiece in the work area to the position to be clamped. When the workpiece in the storage area is clamped, the storage area Move, the next stored workpiece area reaches the position to be clamped, reciprocating. The clamping position of the manipulator can be adjusted, and the length of the workpiece can be clamped in the range of 60-70mm. After grinding one end of the workpiece, the manipulator clamps the workpiece to the rotating mechanism. After the rotating mechanism rotates the workpiece, the manipulator clamps the workpiece to the grinding position and grinds the other end of the workpiece.
www.china-quanshun.com